RC Electric Car Racing Challenge

• STEP 1: Register your RoboClub or Institute as TechnoXian RoboClub online at official TechnoXian website. If you do not have Club or Institute, you may form a new TX RoboClub by introducing minimum 5 members. Registered individual TechnoXian member can also participate in RC Car Challenge.
• STEP 2: Once your RoboClub is active, you may select RoboRace Challenge category from the competition list in your login panel, and apply. You will also be needed to select members from your club who would participate in challenge. Maximum 10 members in 1 team can participate. A club can apply multiple teams for the same challenge.
• STEP 3: Construct a wireless autonomous or manual Bot. Ready-made bots will not be allowed to compete. Only self-made or TechnoXian listed DIY kits can be used to make bot.
• STEP 4: Prepare a video of 1 minute to 5 minutes (maximum 100 MB), showcasing team readiness, creativity, preparing for challenges, or anything to show passion to participate in TechnoXian. Share the video either on email at videosubmission@technoxian.org (as google drive or V transfer) or WhatsApp at +91 8924934336 mentioning Your Team Registration ID. All videos will be uploaded on TechnoXian YouTube channel.
• STEP 5: Receive an Invitation Letter from TechnoXian to participate in particular challenge.

Bot must fit inside a box of 60cm length and 60cm width and 40cm height (excluding antenna) at any point in time. Maximum weight should not be more than 7Kgs, however a tolerance of 5% is acceptable in weight.

Participants need to ensure

• Only single propulsion engine can be used in the car and D motors cant be used for propulsion
• There are no limits on engine power (piston displacement), however, a throttle for controlling speed is mandatory.
• For optimal performance and to avoid engine problems causes by dirt, using a proper air filter is highly recommended
• Batteries must be sealed, immobilized electrolyte type (gel cell, lithium, NiCad, or dry cells).
• The car must use wireless Remote-Control system
• If not available in open market, teams can procure clutch system, brake system, suspension, gearbox assembly, servo motors from readymade toy.
• Any robotic parts/building material can be used until the robot meets the above specifications and if the design and construction are primarily the original work of the team as ready-made robots are not allowed to compete in the competition.

The Racing track has 4 bot lanes of a total length of 300 - 400 Feets (approximately). At starting point, each bot lane would be 80cm appx and track would be 16 Feets wide. At certain checkpoints before the hurdles, track can be 80cm wide. The surface and course line may have un-evenness as well as different hurdles will be there on the race track trying to slow down the car. Predefined Obstacles for the competition will include Switch Bridge, speed breakers, marble pit, slippery path, rotating ting disc, curve ramp down, seesaw, etc.

• The robot must start behind the starting mark and is considered to have crossed the finishing line. Bot must be manually/autonomously controlled, and it should be capable of traversing over different terrain and hurdles without going outside the track. The competition area has a special place defined for the Car’s operation (hereafter COMPETITION FIELD). There would be multiple rounds in Competition until top 3 winning teams are selected. Racing tracks for each round can be changed.
• First Round:Minimum 4 Racing Car would be playing in each round. Team schedule would be announced before competition day. If 1 car is missing in first round, 2 other cars would be competing in Race. If 3 car are missing, present one car would be declared winner for that round.
• Each round would have maximum 5 minutes racing time and 5 minutes for readiness. Readiness time will not be included in racing time. Bot reaching first to finish line, will be declared winner for respective round.
• If car lose the track or stuck up or stop function, Car operator can check the car and restart from same point. Any time used to adjust the car between runs is included in the 5 minutes
• All bots are expected to cross all hurdles on the track.
• Each run will start from the starting point. The operator may abort a run at any time. Each team will get maximum 3 chance to touch the car in each round. If a robot has already crossed the finish line, it may be removed at any time without affecting the runtime of that run.
• During run, team may fix minor technical issues.
• The run timer will start when the front edge of the car crosses the start line and stops when the front edge of the car crosses the finish line.

Qualifying Round: There can be multiple qualifying rounds, depending upon number of teams competing. In each round, minimum 1 team will be qualified for next round whosoever reaches to finish line first as well as within 5 minutes timeline.

Final Round: Elimination in qualifying round will go on until last 3 teams are left. Final round would happen among last 3 teams and 1st, 2nd and 3rd winners will be decided as per performance of team in final round.

Venue : Delhi/NCR (India)
Registration Fee :

• For Indian residents: INR 2950/- (Inclusive GST) per challenge.
• For Non India residents: USD 50 per team.

Prize Bifurcation: INR 1,00,000 (1st Prize) | INR 50,000 (2nd Prize) | INR 25,000 (3rd Prize)

Registration mode : Online.
Accommodation : For inquiries regarding Hospitality Partners you can contact on this Number
+91-9289095404

For Any Query :
Feel Free To Call : (+91) 9289095404
Email : info@technoxian.com